Bumper Repair in Batumi

Bumper Repairin Batumi

Bumper repair at PRO SERVICE (Batumi, Airport Highway 212): we weld cracks and tears in the plastic, restore broken mounts and tabs, and straighten dents with heat. Repair usually costs less than a new bumper. Price — from … GEL, with painting — from … GEL, turnaround 1-2 days.

What we repair

  • Cracks and tears — welding with reinforcing mesh on the back side.
  • Broken mounts and brackets.
  • Dents in plastic — straightening with heat.
  • Holes for parking sensors (when installing or relocating sensors).

Repair or replace

SituationBetter option
Crack, broken mountsrepair
Dent without a tearrepair
Plastic crumbled over a large areareplace
Rare model, no new bumper available in Batumirepair

What affects the price

  • Length and number of cracks.
  • How many mounts are broken and whether they can be repaired or have to be rebuilt.
  • Bumper material: different plastics are welded with different filler rods.
  • Parking sensors, grilles and trim that come off and go back on.
  • Paint after the repair. Almost always needed.

How to check the result

  • On the inside, the weld is covered with reinforcing mesh along the full length of the crack.
  • The bumper sits straight. Gaps to the fenders and headlights match on both sides. It doesn't rattle over bumps.
  • After painting there is no ripple or visible line where the crack was.
  • Parking sensors work, if the car has them.

How the repair goes

  1. We remove the bumper, clean and degrease it on the inside.
  2. Drill the ends of the crack so it does not spread further.
  3. Groove the crack and weld it with a rod of the same plastic from both sides, melting mesh into the inside.
  4. Repair or rebuild broken mounts.
  5. Sand, prime, paint if needed and refit the bumper.
Car before repair Car after repair BeforeAfter

FAQ

How much does bumper repair cost?

From … GEL without painting. After welding the bumper almost always needs paint.

Is a welded bumper reliable?

Yes. A crack welded from both sides with mesh melted into the back holds up to normal flexing and vibration.

Can a bumper be repaired in one day?

Welding — yes. With painting — 1-2 days.

Do you repair plastic fender liners and grilles?

Yes, see plastic repair.

How do I know what plastic my bumper is made of?

Look inside. There's usually a molded marking: >PP<, >PP+EPDM<, >ABS< or another. We pick the welding rod by it. No marking? We identify the material at inspection.

Can you repair a bumper with radar or sensors?

Yes. Sensors come off before the repair and go back after painting. If the bumper carries a cruise control radar, we rebuild its bracket with extra care, because the system depends on where the radar points.

Why is gluing a cracked bumper a bad idea?

A bumper flexes with vibration and temperature, and most adhesives don't bond well to polypropylene. The glue line lets go, the crack opens up and takes the paint with it.

●  06 · Contact

Send a photo — get a price

Describe what happened and attach 2–3 photos of the damage. We reply with a cost and time estimate.

Address
Airport Highway 212, Batumi, Georgia
Directions
Open in Google Maps ↗
PRO SERVICE entrance
Quote by photo