Car Door Repairin Batumi
Car door repair at PRO SERVICE (Batumi, Airport Highway 212): we repair dents, restore hinges, lock and frame, and paint to your paint code. If repair costs more than replacement, we tell you right away. Price — from … GEL, turnaround — 1-3 days.
What we repair
- Dent in the panel — panel beating or paintless dent repair.
- Sagging door — play in the hinges, bushing or hinge replacement.
- Lock and door check — will not close, sticks.
- Frame and bottom edge — rust and deformation after an impact.
Repair or replace
We repair a door if the frame is intact and the dent has no crease. With a badly deformed frame, a new or used door plus paint costs less. Painting: door painting. If the door will not close because the body is skewed, we look at geometry.
Price
| Work | From, GEL |
|---|---|
| Door panel beating with painting | … |
| Hinge or lock repair | … |
| Door replacement with painting | … |
What affects the price
- Where the dent is: the middle of a panel is easier; a dent on a crease, near the handle or at the edge takes more work.
- Access from inside: sometimes the trim panel, glass and window regulator have to come out.
- Condition of the frame and lower edge: rust under the seal adds welding.
- What is inside the door: blind-spot sensors, puddle lights, power locks are removed and tested after reassembly.
- Painting the door alone or blending into the fender and the adjacent panel.
How to check the door after repair
- Gaps to the fender, pillar and the other door are even along their full length, with no step in the line.
- The door shuts with a light push, without slamming and without touching the sill.
- The latch catches first time; central locking and the window work.
- No leaks in heavy rain. The seal sits right and the trim stays dry.
- No ripples when you look along the panel at the reflection.
BeforeAfter
FAQ
How much does door repair cost?
From … GEL. The price depends on dent depth and frame condition.
My door sags — is that expensive?
Usually not. We replace bushings or hinges, after checking the pillar isn't damaged.
Does the door need to be disassembled?
For panel beating from the inside and for lock repair, yes. We take off the trim panel and, if it is in the way, the glass.
How long will it take?
1-3 days.
My door will not close after a hit — is it the door or the body?
Could be either. We check first whether the pillar or hinges have moved. If the gaps are off along the whole side, the body geometry needs measuring, not a replacement.
Do you fit used doors from scrapyards?
Yes, if we find one from a matching year and trim. Before painting we check it for rust and old repairs.
The door creaks and opens stiffly — does it need repair?
Often it's enough to clean and grease the hinges and the door check. If the noise stays, we check the hinge bushings for wear.
The bottom of the door is rusting under the seal — what can be done?
Remove the rust to bare metal, weld in a patch if it has gone through, treat the edge and drain holes with anti-corrosion and repaint.
● 06 · Contact
Send a photo — get a price
Describe what happened and attach 2–3 photos of the damage. We reply with a cost and time estimate.
- Address
- Airport Highway 212, Batumi, Georgia
- Directions
- Open in Google Maps ↗
