Timing Belt Replacement in Batumi

Timing Belt Replacementin Batumi

Timing belt replacement in Batumi at PRO SERVICE (Airport Highway 212): we replace the belt together with the rollers and, where needed, the water pump. Then we set the timing marks and check the start-up. Labor from … GEL, takes 4-8 hours. Parts are charged separately. On many engines a snapped belt means an expensive repair.

Belt or chain

  • A timing belt is a consumable. It goes on the manufacturer's schedule, by mileage or age, whichever comes first. When it's due and what signs to watch for is covered in when to replace the timing belt.
  • A timing chain is built to last longer, but it wears too: stretch, start-up noise, timing fault codes. That's a separate job — timing chain replacement.
  • We check what your car has and the interval by model and mileage.

Why not to put it off

On many engines, when the belt snaps the pistons meet the valves and the valves bend. Now it's a cylinder head repair, not a belt job. Belt mileage and age unknown? Replace it right away.

What is included

  • Belt, tensioner and idler rollers.
  • Water pump. If the belt drives it, it usually goes at the same time, since access is already open.
  • Seals and, if necessary, the thermostat.
  • Timing mark check, start-up, a check after the work.
  • Doubts about the engine's condition? Engine diagnostics first.

How the job is done

  1. We take off the undertray, ancillaries and covers. On some models the engine mount too.
  2. We lock the crankshaft and camshafts at the timing marks or with a dedicated locking tool.
  3. We fit the belt, rollers, and the water pump and seals if needed. The belt is tensioned to spec.
  4. We turn the crankshaft by hand a few revolutions and check that the marks line up again.
  5. We start the engine and check for leaks, unusual noise and timing fault codes.

We also look for oil leaks from the seals and valve cover. Oil eats rubber, and a new belt on an oily engine won't last.

What the price depends on

  • Engine layout. Transverse and V engines have tighter access and more labor.
  • The engine mount, alternator or AC compressor may have to come off.
  • Kit contents: belt, rollers, pump, seals, thermostat.
  • Genuine parts or a proven aftermarket brand — ….

Price

WorkFrom, GEL
Timing belt replacement (labor)…
Water pump replacement together with timing…
Head gasket replacement after damage…

FAQ

How much does timing belt replacement cost?

From … GEL for labor. The parts kit is extra and depends on the model.

Should the water pump be replaced too?

If the belt drives it, usually yes. The service life is similar, and taking it apart again costs more.

What should I do if the belt has snapped?

Don't start the engine again. Tow the car in. We'll check whether the valves are bent.

How long will I wait?

4-8 hours.

Can I replace just the belt and keep the old rollers?

Technically yes. But a roller with a worn bearing can seize and snap the new belt. So belt and rollers go as a kit.

●  06 · Contact

Send a photo — get a price

Describe what happened and attach 2–3 photos of the damage. We reply with a cost and time estimate.

Address
Airport Highway 212, Batumi, Georgia
Directions
Open in Google Maps ↗
PRO SERVICE entrance
Quote by photo