Rust Protection (Undercoating)in Batumi
Rust protection in Batumi at PRO SERVICE (Airport Highway 212): we clean the underbody and treat arches, sills and hidden cavities with anti-rust products. Price — from … GEL, turnaround — 1-2 days. Best done before rust appears.
Why rust protection matters in Batumi
Humid, salty sea air keeps metal from drying out. The underbody, arches, sills and the insides of doors suffer most — water and dirt collect there.
What we treat
- Underbody and wheel arches — after washing and drying.
- Hidden cavities: sills, frame rails, door bottoms.
- Repair areas: sills, arches and welding.
If rust is already present, we first clean it to bare metal; otherwise the product seals in the corrosion instead of stopping it.
How the treatment goes
- Washing the underbody and arches; if needed, we remove the wheel arch liners and the engine splash guard.
- Drying: on damp metal the product bonds poorly and peels off over time.
- Inspection on the lift: we mark rust spots, bubbling and old undercoating that is coming loose.
- Cleaning the rust spots, rust converter, primer.
- The underbody and arches get a dense protective layer; sills and frame rails get a thin penetrating cavity product through the factory access holes.
- We refit the liners and check that the drain holes are open — otherwise water stays trapped inside.
What affects the price
- Vehicle size: sedan, crossover, SUV or van.
- Underbody condition: clean metal or rust spots that need cleaning.
- Old coating: if it is peeling, it has to be removed first.
- Scope: underbody and arches only, or hidden cavities as well.
- How much plastic must come off for access: arch liners, shields, sump guard.
How to check the result
At handover we show you the underbody on the lift. The layer is even, with no gaps on seams and edges. There is no product on the exhaust, brakes or rubber boots, and the drain holes are open.
Price
| Work | From, GEL |
|---|---|
| Underbody and arches | … |
| Hidden cavities | … |
| Full package: underbody, arches, cavities | … |
BeforeAfter
FAQ
How much does rust protection cost?
From … GEL for underbody and arches. The full package is priced by vehicle size.
When is the best time to do it?
On a new or recently repaired car, before rust appears. On an older car — after cleaning out the rust spots.
How often should it be repeated?
Every 1-2 years, depends on the product. The technician will advise after inspection.
How long will it take?
1-2 days, including drying.
Can you treat a car that already has rust?
Yes, as long as the metal is not rotted through. Holes are welded or patched first, then treated.
Does a new car need undercoating?
It has factory protection, but inside the cavities it can be thin or uneven. In a humid seaside climate an extra layer in the arches and sills is worth having.
How should I care for the underbody afterwards?
Avoid high-pressure underbody washing for a few days. Then check the arches and sills once a season — small damage to the layer is easier to touch up early.
● 06 · Contact
Send a photo — get a price
Describe what happened and attach 2–3 photos of the damage. We reply with a cost and time estimate.
- Address
- Airport Highway 212, Batumi, Georgia
- Directions
- Open in Google Maps ↗
